Vol.3 | "Crucible" Pressure Pot System | Printed Complete Kits

This is the "Crucible" Storage System for Pressure Pots and Vacuum Chambers. It is a DIY modular kit that has a huge amount of flexibility!

And this is the listing for you nerds that dont want to think about it too hard. These are Complete kits ready to go in the most common Pressure Pots

Classic Style Kits Include:

• 2 x Classic Arms
  
• 1 x Span Handle
  
• 2/3 Shelves (2 shelves on 2.5gal and 3 shelves on 5.0gal)
  
• 2/3 Replaceable Liners (2 plates on 2.5gal and 3 plates on 5.0gal)
  
• 2 x Stability Feet
  
• 1 Space for Mold making on the 2.5gal and Two on the 5.0gal 
• and All of the required hardware to screw it together!

Modular Style Kits Include:

• 2 x Modular Arms
  
• 2 x Resin Pocket Handles
  
• 1 x Shelf
  
• 1x  Replaceable Liner
  
• 2 x Stability Feet
•  and All of the required hardware to screw it together!
  
  Modular Kits are also sold in "Complete Sets".
  
• 3 Shelves
  • CAT/Vevor 1x80mm and 2x110mm Arms
• 2 Shelves
  
  • CAT/Vevor 1x100mm and 1x110mm Arms
  • Harbor Freight 1x70mm and 1x110mm Arms

------------------------------------------

Why did we even make this?
(Don't you already sell a pressure pot insert)

It’s pretty simple, for the better part of a year folks have asked for a solution to printing a pressure pot insert themselves. That’s it.

But, the design process was a bit more complicated than I initially thought. Firstly, there’s the issue of Epoxy Resin being a glue for pretty much every printable material. And secondly, pressure pots have varying diameters, shapes, and heights. Not to mention some of the more common ones have an inner diameter larger than most printers.

With all of that in mind I built this.

For you. <3

-Buddha